تحلیل نوسان صفحه در آب به صورت کوپل دو طرفه سازه و سیال FSI با نرم افزار ANSYS CFX و روش CFD
در این فیلم آموزشی و این پروژه یک صفحه در زیر سطح آب تحت یک فشار اولیه قرار گرفته و در اثر این فشار که به صورت لحظه ای به صفحه وارد می شود نوسان می کند. نوسان صفحه باعث حرکت سیال و تغییر الگوی آن شده و از طرفی نیز به صفحه از سمت سیال نیروی هیدرودینامیکی وارد می گردد. بنابراین این مسئله جز مسائل کوپل سازه وسیال می باشد.
برای حل بخش سازه ای مسئله از ماژول سازه ای و گذرا در نرم افزار انسیس ANSYS استفاده شده است. حل بخش سیالاتی مسئله به روش دینامیک سیالات محاسباتی CFD و در نرم افزار ANSYS CFX صورت گرفته است.
در بخش سازه ای تغییر شکل های قطعه بر اساس استحکام آن محاسبه گردیده و این تغییر شکل ها به بخش سیالاتی منتقل می گردد. در بخش سیالاتی تغییر شکل ها اعمال گردیده و الگوی جریان سیال که در این مسئله سیال آب است تعیین می شود.
این نوع روش جز دقیق ترین روش های حل مسائل سازه و سیال است اما به دلیل تغییر شکل های محیط سیال و استفاده از ماژول های شبکه بندی مجدد دارای پیچیدگی است.
مسئله به صورت دو بعدی بوده که البته به راحتی می توان مسئله را در حالات سه بعدی نیز حل کرد. از مدل آشفتگی k-ε استفاده شده و شرایط دمایی مسئله به صورت پایدار است.
مسئله به صورت گذرا حل گردیده و مدت زمان آنالیز 5 ثانیه و بازه زمانی حل 0.1 است. مدل آشفتگی k-ε استفاده گردیده و حل عددی با درجه دو به کار رفته است.
کلیه مراحل ایجاد مدل هندسی دامنه محاسباتی سیال، شبکه بندی، تعریف شرایط مرزی، تنظیمات بخش های سازه و سیالاتی و تحلیل و بررسی نتایج در این فیلم آموزشی به صورت متوالی ارائه شده است.
Oscillating Plate with Two-Way Fluid-Structure Interaction
This tutorial uses an example of an oscillating plate to demonstrate how to set up and run a simulation involving two-way Fluid-Structure Interaction (FSI) in ANSYS Workbench. In this tutorial, the structural physics is set up in the Transient Structural analysis system and the fluid physics is set up in Fluid Flow (CFX) analysis system, but both structural and fluid physics are solved together under the Solution cell of the Fluid system. Coupling between two analysis systems is required throughout the solution to model the interaction between structural and fluid systems as time progresses. The framework for the coupling is provided by the ANSYS Multi-field solver using the MFX setup
The geometry consists of a 2D closed water domain and a thin plate, 1 m high, that is anchored to the bottom of the cavity
An initial pressure of 200 Pa is applied to one side of the thin plate for 0.5 seconds in order to distort it. Once this pressure is released, the plate oscillates backwards and forwards as it attempts to regain its equilibrium (vertical) position. The surrounding fluid damps the plate oscillations, thereby decreasing the amplitude of oscillations with time. The CFX solver calculates how the fluid responds to the motion of the plate, and the ANSYS solver calculate show the plate deforms as a result of both the initial applied pressure and the pressure resulting from the presence of the fluid. Coupling between the two solvers is required since the structural deformation affects the fluid solution, and the fluid solution affects the structural deformation.
In ANSYS Workbench, a two-way FSI analysis can be performed by setting up a pair of coupled analysis systems, the pair consisting of a Transient Structural system and a Fluid Flow (CFX) system, as outlined in this section
نمونه کوتاهی از فیلم آموزشی
Brief record of this Training Film
محسن احمدزاده –
✔